How to Assemble Your EVARILO Christmas Collar

By EVARILO · September 27, 2026

Cream EVARILO Christmas collar held beside Ollie the corgi

A few festive details, a little sparkle, and one very curious Ollie. If you’re getting your EVARILO Christmas collar ready for the first time, this guide shows how the pieces come together.

To assemble the collar, press the magnetic charms firmly onto their bases, clip the crystal strand onto both attachment rings, then fasten the buckle. Our short video takes you through the process, with a closer look at each step below.

Cream EVARILO Christmas collar with reindeer charm and red crystal strand held beside Ollie the corgi — The finished Christmas collar, with Ollie taking a closer look.

Watch the collar come together

The demonstration features the Reindeer Crystal Pet Collar & Leash Set in Cream. Here, we’re focusing on assembling the collar and its decorative pieces.

Before you begin

Lay the collar flat on a clear surface and place its magnetic charms and crystal strand beside it. Start with the buckle open so you can easily reach the attachment points.

The magnetic charms and the crystal strand attach differently: the charms fit onto the bases on the collar, while the strand uses a small clasp at each end.

Step 1: Attach the magnetic charms

Line up a charm with its matching base on the collar. Press firmly to seat it in place, then repeat with the remaining charms. In the video, we start with the center reindeer before adding the smaller decorations on either side.

Take a moment to check that each charm is sitting properly on its base before moving on. If one looks uneven, realign it and press again.

Hands aligning a reindeer magnetic charm with its base on a cream EVARILO collar — Align each charm with its base and press firmly into place.

Step 2: Clip on the crystal strand

Find the two small attachment rings on the front of the collar. Open the clasp at one end of the crystal strand, clip it onto the first ring, and let the clasp close. Repeat at the other end.

Check that both clasps have closed and that the strand hangs between the rings without twisting. The red and clear beads add the finishing detail to this Christmas design.

Hands attaching the clasp of a red crystal strand to a small ring on the EVARILO collar — Attach one end at a time, then check both clasps.

Step 3: Fasten the buckle

Bring the ends of the collar together, fasten the buckle, and tuck the loose strap through its keeper. Your collar is now assembled.

Before putting it on your pet, visit our How to Measure & Care guide for help with fit and care.

A closer look, courtesy of Ollie

With the decorations in place and the crystal strand attached, you can see the whole design come together. Ollie was especially interested in this part—although, as the video shows, the collar was still in our hands.

Ready to choose a festive look? Explore the cream reindeer collar and leash set for the complete set details.

Your bond. Your style.

← Back to the journal